Avinash Singh

Posts by Avinash Singh

How can SAEINDIA BAJA helps to get placement?

Let’s first talk about direct placements. As a 3rd year and 4th year UG if you participate in SAE BAJA and make the cut of being one of the best academic students, and cleared BAJA Aptitude Test you get to be a part of the placement procedure by the various automotive companies that come for recruiting. There are many renowned companies that come for recruitment at the event. It’s called HR Meet.

Next, talking from the perspective of participating in BAJA alone will expose you to knowledge beyond the college curriculum. Add to that the experience of building your very own vehicle. After this, whichever automotive company or its ancillaries you apply in you have all the relevant knowledge and experience to be recruited. Moreover, the various companies that come at the event can provide you the network you’ll need to contact a company of your choice. So in this way participating in SAE BAJA will help you with recruitment.

SAE BAJA gives you good practical exposure in terms of vehicle design, Suspension design, and chassis design which are great skills to pick up. They will surely be helpful in your placements.

But, If you are going to BAJA for the sake of placement please don’t join the team. There are 24 other people in the team who are making a car out of passion and not just for the one line in there resume you’ll slow them down.

How to balance your time between your studies and SAEINDIA Events?

Well, it is very hard. Believe me, it’s not only about studies and BAJA but also about other stuff. I don’t get time for anything else than these two.

I will tell you about my routine.

10 am to 4 pm we have college and not supposed to do any activities related to BAJA. So we can only continue after 4 pm. Then we are in our workshop generally till 8 pm, as submissions of reports started it goes till midnight and as event date comes closer it goes till morning.

So you can see it is very hard to manage even these two things and forget about other stuff. What I have experienced is, you attend lectures regularly that will take care of your academics and after 4 pm focus on BAJA, that’s it. Apart from that I never get a chance to hang out with my friends or go out on weekends or to give time for hobbies or attend family functions or simply for sleeping.

Many of my friends complain to me about not giving them replies on time or not calling them or not even receiving their call and then call back or not even message them. Simply because I can’t. But still, I make sure that I at least give replies on time.

If you are willing to do both BAJA and academics you will also have to sacrifice many things like me otherwise you will end up with nothing in your hand…

But the most effective thing I do to manage my time is I write down my short term goals, long term goals, the things I am supposed to do from an academics point of view and from BAJA’s point of view and I try to follow it closely so that I don’t waste my time.

Were you a part of SAE events like Formula SAE/BAJA, and despite giving your best, you never won?

I was part of SAE Baja for two years.

First-year the team was new. Not a single member had any clue about the events and how things were going to be during the event. So we did great in virtuals of last year’s event. We got through it. We tried to do everything we could. Designed our own hubs and knuckle. But for other departments, we relied upon the OEMs including a manual gearbox and Coilover shocks. For us clearing the technical round was no less than an achievement. We did well. That’s all I can say.

Baja SAE India 2016

For the second year, that is this year’s event, we knew exactly what were our strengths, weaknesses, where we could and should improve, what changes should be done, when to do what, what all things should be done and what shouldn’t be. But every single time when you explore new realms you are bound to face the difficulties.


We faced difficulties in fetching the sponsorship last year from that we learned a lesson. And approached hundreds of businessmen. Did try new techniques to raise the funds and to fetch the sponsorship. For example

  • We printed calendars, for that we worked out for almost two months to get the advertisements.
  • I took the classes of SolidWorks and raised money through it.
  • Rented our driver’s kit to other teams.
  • Gave away the projects.
  • Fetched sponsors.
  • Did crowdfunding.

Well, most of the things might not be new to most of the teams but we know that was unprecedented as long as our team was concerned. Also to achieve what we achieved in a city like Bhopal is something we can be proud of ourselves.


We did major changes in suspension, roll cage and drivetrain.

  • Almost every single team goes with Fox suspension. We all know how expensive they are. And looking at our financial problems, we wanted something which would be cheaper but would give a great performance as compared to Fox. So we chose Radlfo shocks.
  • In addition, we were designing the gearbox for the very first time. And for that, we faced tons and thousands of problems. We approached every single person we could. Right from other teams to people who have actually worked upon automobile gearbox and CVTs. But still, it took us December end to get the gearbox manufactured. Yes, you read it right. Our event was in Pritampur and just two weeks before the event rather a week before the transportation of our vehicle. So in a week, we assembled the whole powertrain. And owing to our correct CAD assembly everything turned out to be perfect or at least seemed until we started facing issues with driveshafts. So just two days before, somehow we fixed it. And got our vehicle running. And we didn’t get time to practice at all.
  • As it was done just two days before the transportation, we didn’t get time to work on our brakes and you might be knowing how important it is to work on brakes. Even top teams struggle to clear brake test. We were risking everything.
  • We had customized hubs from the last year’s. So we had problems with CNC manufacturing. And that was horrible. We were gaining a lot of camber because of that during cornering. Camber links turned out to be a savior.

Journey to event

The team’s journey to Pritampur was full of a roller-coaster ride. It was amazing. Even the return journey was memorable. But one incidence tops everything.

I lost my bag at a station. The bag which had my laptop, every single team member’s college id, the bond, insurance papers and driving licenses of both the drivers, SAE Id cards of all the members. We somehow got it.

Main Event

Day 1

Everything seemed quiet in our hands on the first day. We got our engine checked which took a longer time than what we had anticipated. And we got our first technical check with only one or two modifications to be done. But there is one more thing to remember the day for – CAE. We didn’t know we were one of the nine teams to get shortlisted for CAE, in fact, we were the first one. We weren’t prepared at all. Our room was some 32km away from college. We told our vice-captain to make a poster and come. Clueless about where to print the poster, he somehow found one place and got it till afternoon and CAE went well. We must have been in the top three or four if not the winners.

Cost round went okay and we stood 15th.

Sales went amazing but to our surprise, we got fewer marks. We wanted to protest as we were damn sure of our performance but couldn’t do it in time.

Day 2

It started on a good note with we clearing our technical inspection. But just when we were thinking today is going to be our day, things started getting out of our hands. We could only lock 2 wheels. We were testing the whole day to get all those four fucking wheels locked but it seemed an impossible task. Our faculty advisor was doing everything he could with his experience, knowledge and we were doing bleeding of all the four wheels once again with the techniques our sir was telling us. But it was all to no avail.

Then just when they were announcing the brake test would be closed in half an hour, our accelerator cable snapped. Somehow with jugaad we managed to do it. And cleared our brake test.

Just when we were moving from brakes test to dynamics event, they closed every dynamic event. But we requested for acceleration and they agreed. We gave our attempt and were the last ones to do so. We were 11th in acceleration.

The design event was horrible. They pointed out very small things. Like the number of threads protruding after the nut, routing of hoses, etc.

Day 3 (D-day)

Just when we were excited about being in Endurance and not facing problems we had anticipated so far, our batteries drained. Both of them, including one in spare. We took a new from our friend’s team and even that drained. We were told to sort it out. Every single coordinator/judge was stopping by our vehicle when we were trying to sort it out while in the grid. Fortunately, our team members could get it in time from Indore city. Only we know what a horrible experience it was!!

The race started and after the first trial lap(formation lap) our driver lost the track and he came to the initial position where it started the race. We lost valuable time.

After a few laps, we took the sigh of relief only to find out our vehicle had not completed the lap in the last 20 minutes. It wasn’t even in pits. We told the Marshall and he contacted there and we got to know that we had some breakdown. We knew what it was. It was driveshafts. They took a lot of time to tow our vehicle to pit. We lost half-hour in that only. Once the vehicle was in pits we took the feedback from the driver and told him what to do and what not to do even though he already knew our strategy. We made a new driveshaft and welded it. It took 45 mins.

We were again in the race and this time we were confident as apart from that there was nothing else we had anticipated to fail. Only that half shaft was supposed to fail and it failed. But as we fixed even that we knew we could race till last.

But what endurance it is if you don’t face problems? We again had problems with CVT and it was because of only one bolt. Because of that the CVT belt and secondary pulley got displaced. The belt was getting crushed between casing and pulley. We fixed even that in 10–15 mins. If that sounds easy, imagine working with a belt and pulley which are hot as a frying pan.

After that, we ran like anything and stood 10th in Endurance.

From overall 104th in last year’s event to overall 17th.

From 96th in acceleration in the last years to 11th.

From 100th in cost, last year’s top 15th this year.

From backing out after 3 laps and incurring a penalty of 100 points in Endurance in last year to finishing 10th.

I guess it all was no less than an achievement to me.

Did we do our best? – I don’t know. Probably we did more than that. After facing all sorts of problems to overcoming all those and finishing the race I guess we can call it a win. A win which wasn’t awarded with any trophy or money but with a sense of happiness on all of our faces. A win where we could bring a smile and sense of satisfaction on our faculty advisor’s face. We faced all the problems like a team. Never blamed anyone for their mistakes but patted everyone for their great jobs. We lived it like a separate life which will probably never be lived once again but we made it count. From sleepless nights and countless days to finish it like a boss, I guess we won. And if that doesn’t sound like a win I don’t what would…

What are the powertrain calculations for the E-Baja competition?

It is similar to m-BAJA powertrain calculation.

First of all, you should find drag forces on the vehicle then find out the torque on wheels, after that decide your reduction on the basis of your motor output torque. Its depend on you that which type of transmission system you choose (auto or manual). Then find your acceleration, top speed and gradeability of vehicle.

For the basics take help from fundamental of vehicle dynamics by Thomas d. Gillespie and for coefficients and constants take help from google search engine.

Is bike suspension suitable for E Baja vehicle?

It’s better to use fox or Polaris suspensions designed for ATVs.

Most probably there would be a need of 6 Inch play in the wheel and considering the motion ratio of 0.6 there would be a need of 10-inch play and therefore no bikes are designed to this spring compression. You can use bike suspension like Yamaha FZ, KTM duke series, and RE Himalayan mono-shocks but that doesn’t justify the purpose of the vehicle and also bike suspension eye to eye length is very less so it would create a problem.

Fox offers a discount for Baja students in the form of sponsorship at will help teams economically as well.

Best Material for Rollcage (m-BAJA and e-BAJA)

In case you are planning for making a BAJA roll cage(m-BAJA or E-BAJA), you can consider the option of using AISI 4130 Chromoly steel tubes.

They are pretty strong and quite lightweight too. Their specifications are:

ASM Material Data Sheet

They are pretty difficult to procure in Bangalore, you may have to order it from Pune or any other nearby states.

4130 costs you around 450–500 per meter. In case you find this out of your budget, you can go with the ASTM A106 GRADE B.They too have good mechanical properties and are available at a price of 300–350 per meter.

DIYguru, India’s Maker’s Learning Platform announces massive price cut on Online Courses amid Global Coronavirus Outbreak.

Get certified from India’s #1 Makers Learning Platform for Industry 4.0 upskilling trusted by Bosch, Hyundai, Essel Energy, Digital India Foundation on DIYguru Online Certification & Job Assisted Courses for Mechanical, Electrical & Electronics Engineering Students.
1. Electric Vehicle (Rs. 3999) – https://www.diyguru.org/course/electric-vehicle/
3. Vehicle Dynamics (Rs. 2999) – https://www.diyguru.org/course/vehicle-dynamics/
4. BS 6 Emission Technology (Rs 2999) –
5. AUTOMOTIVE SKETCHING – (Rs. 2999)- https://www.diyguru.org/course/automotive-sketching-drawing/
7. CATIA – CAD – (Rs. 1999)- https://www.diyguru.org/course/catia/
8. MULTI BODY DYNAMICS -(Rs. 2999) – https://www.diyguru.org/course/msc-adams-car/
10. SOLIDWORKS – (Rs. 1999) – https://www.diyguru.org/course/solidworks/
11. LABVIEW – (Rs. 2999/)- https://www.diyguru.org/course/labview/
13. Fundamentals of Automobile Engineering (Rs. 3999) – https://www.diyguru.org/course/fundamentals-automotive-engineering/
15. Additive Manufacturing ( Rs. 2999) – https://www.diyguru.org/course/rapid-prototyping-3d-printing/
Complete Industry 4.0 Package at 20,000 INR + GST

Mechanical Engineering > Whatsapp Group Invitation Links


Friends everyone knows education is very important, I think you understand what I am saying and especially mechanical engineering students struggled with lot problems, they don’t have guidance about engineering education like which books are used to our education and which type jobs are we get.

friends WhatsApp group links are used for this type of student and people, MEC students you don’t worry about that your bad time is gone. We have a wide range Of WhatsApp group links list with a min of 220+ WhatsApp group links list for each post and we also accept WhatsApp group links from you so if you have any type of WhatsApp group invite link then do share it with us so that I will update your link into the post.


Whatsapp is a very popular social media Application in android, ios, windows. and We Can Create Whatsapp Group in Whatsapp application. In this Whatsapp Group, We can add up to 256 members and send any Message, Video, Photos, etc. By making any group you can send any type of message in a second.


  • Don’t share other group details
  • Don’t abuse group members and group admin
  • Don’t make video calls
  • Friends don’t share illegal content
  • Don’t text religion type messages
  • Only education details are allowed
  • Give respect and take respect
  • Adult content not allowed
  • Do not change the group name or group image
  • Do not spam the group
  • You are not allowed to share any type of links
  • Don’t be offended if others leave.
  • For more rules check the description of the group after joining or ask the group admin.
  • No promotion or Adverting in these groups

BAJA Tutor Exclusive from DIYguru | India’s Leading Authority in E-Mobility Workforce Training

New Year Greetings from Team Baja Tutor!

Electric vehicles are a sunrise opportunity in the coming year as India has over 72 per cent two-wheelers; our endeavour should be to make these electric and also manufacture EVs for the world. The Niti Aayog has proposed that all two-wheelers below the capacity of 150cc sold in the country after March 31, 2025, should be electric. It has also proposed that all three-wheelers sold in the country should be electric after March 31, 2023.

In view of the same, we are on a Mission to Upskill a Million People. You will not want to miss the Course on Electric Vehicle Engineering. Join us to unlock new opportunities for learning, networking, and growth.

We bring you the exclusive Job oriented Electric Vehicle Course from DIYguru at discounted price. Use the coupon code – BAJATUTOR2020 to avail 80% discount.
Limited Seats available.

Early Bird Fee ends on January 6th, 2020